Results 11 - 20 of 140

• Stability Mapping to Examine Ground Failure Risk: A Field Study at a Limestone Mine
  7/1/2009 - Conference papers
  This paper presents a description of geologic settings, mining conditions, rockmass characterization with geotechnical risk assessment, analysis, mapping, and control techniques used at an underground stone mine in Central Pennsylvania.
• Technology News 526 - Proceedings of the International Workshop on Rock Mass Classification in Underground Mining
  7/1/2007 - Technology News
  The International Workshop on Rock Mass Classification in Underground Mining provided a forum for leading practitioners of rock mass classification from around the world to come together and share their methods and experiences with the technique.
• Ground Control Design for Highwall Mining
  2/1/2005 - Conference papers
  Highwall stability remains a major concern during highwall mining. Geologic structure (hillseams) and pillar stability are the two major factors affecting highwall stability.
• Analysis of Practical Ground Control Issues in Highwall Mining
  8/1/2004 - Conference papers
  This article discusses highwall stability, reasons for early pull out of highwall miner holes, and geotechnical engineering and planning factors, as well as operating practices to improve highwall stability and minimize the risk of a trapped miner.
• Computer Simulation of Ground Behaviour and Rock Bolt Interaction at Emerald Mine
  8/1/2004 - Conference papers
  This paper focuses on a computer simulation used to model roof behavior and rock bolt interaction in a collaborative study of ground behavior, reinforcement performance, and stress redistribution in a coal mine entry under severe horizontal stress.
• Applications of the Point Estimation Method for Stochastic Rock Slope Engineering
  6/1/2004 - Conference papers
  The point estimation method for the probability of sliding is efficient and expedites slope stability simulation routines in NIOSH software to stochastically describe rock slope behavior and assist engineers in catch bench design for large slopes.
• Variation of Horizontal Stresses and Strains in Mines in Bedded Deposits in the Eastern and Midwestern United States
  8/1/2003 - Conference papers
  This paper describes a study where the variations of the magnitude of the horizon stresses in sedimentary deposits in the eastern and Midwestern U.S. are examined with respect to two factors, the elastic modulus of the rock and the site depth.
• Using the Coal Mine Roof Rating (CMRR) to Assess Roof Stability in U.S. Coal Mines
  8/1/2001 - Peer reviewed journal articles
  The CMRR quantifies defects in the rock mass and compiles a strength value used for engineering design. The CMRR has been applied to a number of ground stability problems. The CMRR procedure and some of these applications are described in this paper.
• Toward Pillar Design To Prevent Collapse of Room-and-Pillar Mines
  2/1/2001 - Conference papers
  Three alternative approaches to reduce the risk of catastrophic collapse are described: containment, prevention, and full-extraction. Without good data available on post-failure pillar behavior, containment and full-extraction are the safest.
• Analysis of Safety Aspects and Mining Practices for Effective Ground Control in Surface Mining
  8/1/2000 - Conference papers
  To determine causes of slope failure and highwall/spoilbank failure, this study reviews accident statistics, surface mining laws, the relevant literature, and observations from mine visits. The study emphasizes surface mines in WV, OH, and PA.